DESCRIPTION

Loss of adhesion of a coating under eaves, porches, or other protected areas.

POSSIBLE CAUSE

• Under eaves, porches, or other protected areas, the natural cleaning effect of weathering does not occur, and air pollution or other contaminants can build up.
   

• Salts, which can form during the life of the existing coat, were not removed before the new coat of paint was applied. These salts form an invisible film, preventing a bond with a new topcoat.
   

• Paints are applied to old hard and glossy paint films.
   

• Insufficient surface preparation.

SOLUTION

See Lead Information.
 

• Follow label and data page directions for proper surface preparation methods for the coating. Extra attention should be directed to areas that are not exposed to direct weathering.
   

• Test the coating surrounding any peeled areas out about 6" to 12" to be sure the adhesion is adequate.

EXTERIOR

Primer

(if needed)

Exterior Latex Wood Primer
Exterior Oil-Based Wood Primer
Loxon® Concrete & Masonry Primer/Sealer
Loxon® Conditioner
Pro Industrial™ Pro-Cryl® Primer
All Surface Enamel Primer


Emerald®
Duration®
Resilience™
SuperPaint®
A-100®
WoodScapes®

See Exterior Paints