DESCRIPTION

Loss of adhesion of the paint film caused by high levels of moisture that penetrate the film and eventually push the film away from the substrate.

POSSIBLE CAUSE

• Excessive moisture in a home resulted from cooking, showering, or the use of a humidifier, vaporizer, or hot tub.
      

• Excessive moisture in a home due to a high level of humidity in the basement and/or foundation.

SOLUTION

See Lead Information.
            

• Proper ventilation can fix most interior moisture problems. High-moisture areas such as bathrooms with showers should have exhaust fans installed.
  

• Proper ventilation in the walls and/or roof of the home may be necessary. Heavily insulated and sealed homes need a means for moisture to escape, such as roof vents and possibly outside wall vents.
   

• Allowing moisture to escape via open windows is an option.
   

• If high levels of moisture/humidity exist in a basement, the cause of this must be determined and fixed.
   

• Once proper ventilation has been installed, peeling paint should be removed and the underlying surface cleaned and primed. Test the coating in a 6" to 12" radius around any peeled areas to be sure its adhesion is adequate. Follow label and data page directions for proper surface preparation.

INTERIOR

PRIMER

(if needed)

Premium Wall & Wood Interior Latex
Multi-Purpose Interior Oil-Based/Undercoater
Loxon® Concrete & Masonry Primer/Sealer

SUGGESTED FINISH
Duration Home®
Cashmere®
SuperPaint®
ProClassic®
H&C® Basement & Masonry Waterproofer

See Interior Paints

CAULK
SherMax™ Urethanized Elastomeric Sealant
PowerHouse™ Siliconized Acrylic Latex Sealant
Kitchen & Bath