DESCRIPTION

Deep, irregular cracks resembling dried mud in the dry paint film.

POSSIBLE CAUSE

• Paint is applied too thick.
   

• Paint is allowed to build up in corners during application.
   

• Surface was not prepared properly; contaminants were not removed.

SOLUTION

See Lead Information.
 

• Follow label and data page directions for the appropriate surface preparation.
   

• Follow label and data page directions for the appropriate film build.
   

• Determine the correct roller cover based on the coating being applied and the surface. On smooth surfaces, a mohair, 1/4", or 3/8" roller nap is usually sufficient. On textured surfaces, a 3/4" nap or greater is needed.
   

• Smooth the coating by scraping and/or sanding, prime if needed, and repaint.
   

• Quality paints have very good application and hiding properties, which minimize the tendency to apply too thick a coat of paint.

INTERIOR

Primer

(if needed)

Premium Wall & Wood Primer
Loxon® Concrete & Masonry Primer/Sealer

Suggested Finish
Duration Home®
Cashmere®
SuperPaint®
ProClassic®

See Interior Paints

EXTERIOR

Primer

(if needed)

Exterior Latex Wood Primer
Loxon® Concrete & Masonry Primer/Sealer
All Surface Enamel Primer

Suggested Finish
Duration®
SuperPaint®
A-100®
WoodScapes®

See Exterior Paints