Clean all surfaces of the table with a bucket of soapy water and sponge to remove dirt and oils before priming.

Sand the surface of the coffee table. Wipe excess dust with a damp cloth.

Use a Purdy Clearcut Elite brush to edge the coffee table with Premium Wall & Wood Primer.

Note: If painting on bare wood, use Extreme Bond if an adhesion primer is needed.

Now with the Contractor Series Mini Roller Frame, prime the rest of the table using the “W” technique. Let dry.

Use painter’s tape to section off the exterior area of the coffee table.

Using a 2” brush, apply Emerald Urethane Trim Enamel (Rockweed SW 2735) to the edges of the exterior surface.

Use a mini roller to paint the remaining surface, going the direction of the grain. Let dry.

Once paint is dry, tape off the freshly painted section in preparation for applying the next color for the interior of the coffee table.

Use a 2” brush to apply Emerald Urethane Trim Enamel (Reflecting Pool SW 6486) to the inside edges and corners.

Use a mini roller to paint the remaining of the table. Let dry.

Remove tape, and enjoy!

The BEFORE & AFTER…

WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority.