Skip navigation

DESCRIPTION

Loss of adhesion of a coating under eaves, porches, or other protected areas.

POSSIBLE CAUSE

  • Under eaves, porches, or other protected areas, the natural cleaning effect of weathering does not occur, and air pollution or other contaminants can build up.
     

  • Salts, which can form during the life of the existing coat, were not removed before the new coat of paint was applied. These salts form an invisible film, preventing a bond with a new topcoat.
     

  • Paints are applied to old hard and glossy paint films.
     

  • Insufficient surface preparation.

SOLUTION

See Lead Information.
 

  • Follow label and data page directions for proper surface preparation methods for the coating. Extra attention should be directed to areas that are not exposed to direct weathering.
     

  • Test the coating surrounding any peeled areas out about 6" to 12" to be sure the adhesion is adequate.


EXTERIOR

App Server Details

generated on: Thu Dec 05 08:06:13 UTC 2024

Host: tsapp-5d57d58ccd-z49rr

Server Port: 443

Local Port: 5443

Instance: server1

It took 0 milliseconds to generate this page.