Skip navigation

 

DESCRIPTION

Appearance of a darker/denser color or higher sheen where two layers overlap during paint application.

POSSIBLE CAUSE


  • Failure to maintain a "wet edge" when painting. Essentially, some areas are receiving 2 coats.
     

  • Painting on an unsealed surface.
     

  • Painting under high temperatures.

SOLUTION

See Lead Information.
         

  • Maintain a wet edge. When painting, apply paint in the unpainted area first and then back into the wet paint surface. This technique will produce a smooth, uniform appearance. Work in manageable-size areas; plan for interruptions at a natural break, such as a window, door, or corner.
     

  • Prime the surface with the appropriate primer to prevent the paint from soaking into the surface and drying too quickly.
     

  • Follow label and data page directions for the appropriate environmental conditions.
     

  • Begin rolling at a corner near the ceiling and work down the wall in three-foot-square sections.
     

  • Spread the paint in an "N" pattern, starting rolling from a dry area into the wet area.
     

  • Cross-roll to fill in the "N".
     

  • Finish with light, downward, parallel strokes to uniform the finish.


INTERIOR

EXTERIOR

App Server Details

generated on: Thu Dec 05 08:03:17 UTC 2024

Host: tsapp-5d57d58ccd-5mv4z

Server Port: 443

Local Port: 5443

Instance: server1

It took 0 milliseconds to generate this page.